Farun Machinery Co., Ltd.

Explosive splitting machine is an ideal equipment for rock mining
Dongguan Farun hydraulic splitting machine can generate tons of splitting force with a single gun and can easily split boulders in a few seconds. It has the characteristics of small size, light weight, easy operation, high work efficiency, and outstanding cost performance. It is a good choice to replace blasting and splitting rock and concrete. After continuous upgrading and improvement, the current product has mature technology, reliable quality and easier operation. It has become one of the auxiliary construction equipment designated by major engineering companies. The product construction technology has been widely recognized and praised by the industry.
. Product composition: It consists of
hydraulic pump station (also known as power station) and splitter (also known as splitting gun).
.Working principle: The ultra-high-pressure hydraulic oil output from the pump station is the working power, and after mechanical amplification, the split object is split in a predetermined direction.
.Application fields:
⑴Building stone mining operations: secondary disintegration of large ores (metallic ores, non-metallic ores)
⑵Concrete components (cement pavements, machine tool foundations, bridges and House components) partial and complete demolition operations.
⑶Water conservancy, hydropower and dangerous rock slope gravel treatment.
⑷ Trenchless pipeline construction, demolition of rocks in real estate foundation pits and huge boulders blocking roads.
Note: Power oil stations are divided into three types: electric and diesel.
Note: Standard configuration: one machine and three guns. Electric and diesel-powered splitters can be equipped with up to one gun per machine.
Introduction to hydraulic splitting machine
1. Working principle:
Hydraulic splitting machine is a patented product of our company, which is produced by a power station (electric power station and diesel engine power station) High-pressure hydraulic oil is used as the energy source and is transported to the cylinder tubes of each splitting machine (also known as splitting gun) through oil pipes to control the push and expansion of the piston rods in the splitting machine. The wedge principle is cleverly applied to increase the force of the splitting machine. Reaching hundreds of tons or even thousands of tons. Although rock and concrete have great external compressive strength, their internal tensile strength is relatively limited. It is precisely because of these characteristics of each other that the splitter can be used to split materials within a few seconds. Easily split boulders and separate hard ores from mountains.
2. Operation process of operation steps:
Use equipment such as air gun or hydraulic rock drill to set split points and drill holes on the rocks or concrete that need to be demolished.
. Evenly apply grease on the contact surface between the splitting block and the wedge of the splitter to reduce the working resistance of the splitter.
.When purchasing the machine, we will deliver a barrel of the company's special grease (one barrel can be used for 3-months).
.Open the power station, turn the manual valve on the power station to the left or right working gear, and at the same time open the manual valves on all splitting machines to the left or right working gear to determine the splitter wedge. The running direction of the machine.
.Insert the splitter into the hole of rock or concrete, open the manual valve working gear, and start splitting.
.The split section of a single gun can reach square meters or more.
b. The harder the rock, the more fragile it is in terms of tensile strength, and the better the splitting effect.
Each split takes - seconds.
Features of Dongguan Farun Hydraulic Splitting Machine:
. The product is lightweight, easy to operate and safe to use. The splitter weighs about 3. One person can easily operate it with a single manual valve control. Ordinary workers can use it skillfully after one operation. Dust, noise and vibration will not be generated during the work, so it is very safe.
.Mature technology and reliable quality. Dongguan Farun's strong capital strength and scientific research strength provide strong support for the continuous upgrading and improvement of products. The quality of the current hydraulic splitter products has reached a leading level.
.High work efficiency and outstanding cost performance. The hydraulic splitter has a splitting force of nearly a ton with a single gun, and the splitting section can reach more than square meters at one time. The splitting force of multiple guns is several thousand tons, and it can split a huge boulder in about ten seconds. Compared with similar foreign products, the price/performance ratio is very high. protrude.
Precautions for use of hydraulic splitting machine
In order for you to better use our hydraulic splitting machine and avoid undue malfunctions of the hydraulic splitting machine, the operator must pay attention to the following matters when using the splitting machine and Strictly comply with:
1. Only after the hole depth reaches the standard can the splitter be inserted into the hole for splitting. (The hole depth requirement is: the length of the splitting block at the front end of the splitter + or more. For example, if the splitting block is long, then the splitter must be drilled to a hole deeper than the splitter)
2. Each splitter splits 3 holes. Finally, apply some grease to reduce the friction between the wedge and the splitting block.
Hotline: Miss Hu:
Dongguan City, Guangdong Province Farun Machinery Co., Ltd.